What to do if my Samsung Air Conditioner displays IPM over heat error on inverter 1?
If your Samsung Air Conditioner displays an IPM over heat error on inverter 1, contact an Authorized Service Center.
What to do if my Samsung AC024MNADCH/AA Air Conditioner shows compressor overload prevention?
If your Samsung Air Conditioner shows compressor overload prevention, contact an Authorized Service Center.
Why is my Samsung Air Conditioner cooling operation restricted?
If the cooling operation of your Samsung Air Conditioner is restricted at an outdoor temperature below Tcool_low value (default: 0 °C), adjust the outdoor temperature settings.
What to do if my Samsung AC024MNADCH/AA Air Conditioner system stops due to OLP temperature control?
If your Samsung Air Conditioner system stops due to OLP temperature control, contact an Authorized Service Center.
What to do if my Samsung AC024MNADCH/AA Air Conditioner is not installed smart?
If Smart Install is not installed, install Smart Install.
What to do if my Samsung Air Conditioner shows error due to abnormal rotation of the compressor?
If your Samsung Air Conditioner shows an error due to abnormal rotation or unconnected wire of the compressor, contact an Authorized Service Center.
What to do if my Samsung Air Conditioner has a communication error between indoor and outdoor units?
If your Samsung Air Conditioner shows a communication error between the indoor and outdoor units (pre-tracking failure or a mismatch in the number of indoor units), contact an Authorized Service Center.
What to do if my Samsung AC024MNADCH/AA Air Conditioner displays an indoor fan error?
If your Samsung Air Conditioner is showing an indoor fan error, contact an Authorized Service Center.
What to do if my Samsung AC024MNADCH/AA system stops due to full current control?
If your Samsung Air Conditioner system stops because of full current control, contact an Authorized Service Center.
What to do if my Samsung Air Conditioner system stops due to overload protection control?
If your Samsung Air Conditioner system stops due to overload protection control, contact an Authorized Service Center.
General| Refrigerant | R410A |
|---|---|
| Cooling Capacity | 24000 BTU/hr |
| Heating Capacity | 24000 BTU/h |
| Noise Level (Indoor) | 24 dB |
| Power Source | Electric |
To Next Page
