Troubleshooting
4-4 Samsung Electronics
Step 3. Check the option you have set
After setting option, press button to check whether the option code you input is correct or not.
Step 4. Input option
Press the operation button with the direction of remote control for set.
For the correct option setting, you must input the option twice.
Step 5. Check operation
1) Reset the indoor unit by pressing the RESET button of indoor unit or outdoor unit.
2) Take the batteries out of the remote controller and insert them again and then press the operation
button.
→
→
→
→
→
→
→
→
→
To Next Page
Loading...
Need help?
General
