Troubleshooting
4-24 Samsung Electronics
4-3-17 Setting an indoor unit installation option
䯴 Setting an indoor unit installation option(suitable for the condition of each installation location)
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2. The panel(display ) should be connected to an indoor unit to receive option.
3. Set the installation option according to the installation condition of an air conditioner.
- The default setting of an indoor unit installation option is 02000-100000-200000-300000.
4. Set the indoor unit option by wireless remote controller.
▶ Heating setting compensation (SEG21) is applied to Heat pump model only.
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
0 2 RESERVED RESERVED RESERVED RESERVED
SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
1 RESERVED RESERVED RESERVED RESERVED RESERVED
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
2 External control
External control
output
RESERVED RESERVED RESERVED
SEG19 SEG20 SEG21
3 RESERVED
Heating setting
compensation
To Next Page
Loading...
