To Next PageTo Next PageWhat to do if Samsung Heating System detects OUTDOOR UNIT compressor freezing?
If your Samsung Heating System detects outdoor unit compressor freezing, check the cycle status, specifically if the outdoor unit (condenser) is frozen. Inspect the condenser.
What to do for indoor unit address setting error in Samsung Heating System?
If you encounter an indoor unit address setting error on your Samsung Heating System, check the address setting of the indoor units.
How to resolve [Inverter] compressor rotation error in Samsung Heating System?
If your Samsung Heating System reports an inverter compressor rotation error, check the compressor connection status and the resistance between different phases of the compressor.
What to do if there is a communication error between the remote controller and the Hydro unit in my Samsung Heat Pump?
If your Samsung Heat Pump displays a communication error between the remote controller and the Hydro unit, the suggested solution is to change parts.
How to fix indoor unit communication error on Samsung Heating System?
To address an indoor unit communication error in your Samsung Heating System: * Check the communication cable of the indoor unit. * Check the DC output voltage at the communication terminal.
How to troubleshoot outdoor fan 2 error on Samsung Heating System?
If your Samsung Heating System displays an outdoor fan 2 error, check the input power connection status. Verify the connection status of the motor and the outdoor unit PCB. Also, check the indoor/outdoor unit fuse.
How to fix [Inverter] compressor startup error in Samsung Heating System?
If you're experiencing a compressor startup error on your Samsung Heating System, check the compressor connection status. Also, check the resistance between different phases of the compressor.
How to troubleshoot outdoor fan 1 error on Samsung Heating System?
If your Samsung Heating System is showing an outdoor fan 1 error, you should check the input power connection status. Verify the connection status between the motor and outdoor unit PCB. Also, inspect the indoor/outdoor fuse.
How to fix [Inverter] total current error/ PFC over current error in Samsung Heating System?
If your Samsung Heating System is showing an inverter total current error or PFC over current error, begin by checking the input power. Next, verify the coolant charging status. Finally, ensure that the outdoor fan is operating normally.
What to do if a gas leak error is detected in Samsung Heating System?
If your Samsung Heating System indicates a gas leak error, you should check the coolant charging status. Also, examine the indoor EVA sensor. Ensure the outdoor unit service valve is open and verify that the indoor/outdoor installation pipe and wiring are correctly installed.
Guidelines for performing service operations safely and correctly.
Safety measures for handling electronic components sensitive to static electricity.
General safety warnings to prevent electrical shock, fire, and injury during operation.
Safety measures for handling refrigerants, including environmental and health concerns.
Detailed technical specifications for outdoor and indoor unit models, including split and mono types.
Step-by-step guide for disassembling the tank integrated hydro unit.
Step-by-step guide for disassembling the outdoor unit.
Diagnosing and resolving issues related to the wired remote controller and error codes.
Guides for identifying and fixing problems based on observed system symptoms.
Troubleshooting flowcharts for communication errors and other system issues.
General