Need help?Do you have a question about the Samsung AE050JXYDEH/EU and is the answer not in the manual?
General| Model | AE050JXYDEH/EU |
|---|---|
| Category | Heat Pump |
| Type | Air-to-Water |
| Cooling Capacity | 5.0 kW |
| Energy Efficiency Class (Heating) | A++ |
| Energy Efficiency Class (Cooling) | A+ |
| Refrigerant | R32 |
| COP (Heating) | 4.0 |
| Heating Capacity | 6.0 kW |
| Noise Level (Outdoor) | 50 dB(A) |
| Power Supply | 220-240 V |
| Operating Temperature Range (Heating) | -15 - 24 °C |
| Operating Temperature Range (Cooling) | 46 °C |
Diagram illustrating the wiring connections for heating and hot water system configurations.
Diagram showing the wiring connections for a multi fuels heat pump system.
Wiring diagram for multiple heat pumps configured for heating only applications.
Wiring diagram for multiple heat pumps configured for both heating and hot water.
Diagram illustrating the wiring connections for a combi hybrid heat pump system.
Diagram showing the wiring connections for a heating only hybrid heat pump system.
Instructions for flushing the system and setting the cylinder immersion heater temperature.
Steps for applying power to the units and verifying the controller's initial status.
Configuration options for heating weather compensation, flow temperatures, and run signals.
Settings for cylinder connection, heating times, legionella cycles, and hybrid boiler integration.
Steps to electrically test circulation pump, port valves, and heat pump run signals.
Procedure to test and verify the required flow rate for the heat pump in heating mode.
Procedure to test and verify the required flow rate for the heat pump in hot water mode.
Steps to start the heat pump in heating mode, including room stat and pump activation.
Procedure to start the heat pump in hot water mode, setting target temperatures and activating the immersion heater.
Diagnosing E911 faults related to insufficient water flow rate and flow switch function.
Addresses cold weather startup issues, frost protection, and E904 cylinder stat errors.
To Next Page