Checking before use
Using indoor unit
Make sure that curtain does not block the air inlet.
It may decrease cooling performance by blocking air circulation.
In Cool mode, set the appropriate desired temperature.
If the desired temperature is too low, it may be harmful for human body and power consumption will also increase. Set
the desired temperature about 5 °C lower than the outdoor temperature.
Use extra heating apparatus during heat mode.
Heating performance of the air conditioner may decrease when the indoor•outdoor temperature drops. Therefore, use
extra heating apparatus. (Applicable model: AF55JSMA Series)
When cooling the room, use air conditioner and fan together to save energy.
When the air conditioner is used with fan, cooling will be more effective and energy can be saved.
When the air conditioner is operating, close the doors and windows.
When the air conditioner is used with doors and windows open, cooling/heating effect will decrease.
If you use the air conditioner for over an hour, open the window to ventilate the air about once every hour.
Install the product away from sunlight or heating devices.
Close the curtain when the sun shines.
Do not use any heating devices during cooling operation. Cooling effect will decrease.
Storing the indoor unit
Dry the air conditioner thoroughly by operating Fan or Purity mode for 3 to 4 hours.
Stop the operation and disconnect the power plug.
• Do not move the product on your own. Pipe may get loose or damaged and cause refrigerant leakage.
CAUTION
Using outdoor unit
Take away any covers or barriers.
It may cause product failure, and poor performance in cooling/heating by blocking air flow.
Installing outdoor unit
Install the outdoor unit in well ventilated area with no sunlight. If sunlight is unavoidable, install a sunshade.
ENGLISH-13
01 PREPARATION
PAC MIRAGE Saudi_IBIM_EN_CS6_DB68-04872A-05.indd 13 2016-08-08 오전 11:38:18
To Next Page
Loading...
