Troubleshooting
PROBLEM SOLUTION
The air conditioner
does not work at
all.
• Check power status and then operate the air
conditioner again.
• Check whether the power plug is connected
correctly or the auxiliary power switch is
switched on.
• If the air conditioner is switched off by the Timer
function, press the Power
button.
The temperature
adjustment is not
working.
• Temperature adjustment is not available when
the air conditioner is operating in Fan mode or
Turbo/Purity function is selected..
Cool air does not
come out of the air
conditioner.
• Check if the set temperature is higher than
the current temperature. Press the Temp +
or - button on the remote controller to set the
temperature lower than the current temperature.
• Check if the air filter is blocked by dirt. If there is
a lot of dust on the Air filter, cooling performance
may decrease. Clean them frequently.
• Check if the outdoor unit is covered or installed
near the obstacle. Take the cover off and take the
obstacle away.
• Check if the indoor unit is installed in a place
with direct sunlight (in Cooling operation). Close
the curtain or blind to cover the sunlight.
• If the doors or windows are open, it may cause
poor cooling performance. Close the doors and
windows.
ENGLISH-33
05 OTHERS
PAC MIRAGE Saudi_IBIM_EN_CS6_DB68-04872A-05.indd 33 2016-08-08 오전 11:38:28
To Next Page
Loading...
