Using the Long function
Long function will be helpful when you want the cool air to go to much further place.
AF55JVMAN / AF55JSMAN
Remote controller display
ACKNPPCC
Remote controller display
1. Press the Options button.
2. Press the < , > or Options button until (Long) indicator starts to blink.
3. Press the SET button to set the Long function.
- (Long) will blink fi rst, then remain on the display as (Long) and the function will
begin.
Cancel
Press the Options button and then <, > or Options button to make the
(Long) indicator blink and press the SET button.
• You cannot select the Long function and the Turbo function simultaneously.
• You can only adjust horizontal (left and right) air swing.
• You cannot adjust the fan speed.
• You cannot set the Long function while operating in Dry/Fan mode.
NOTE
ENGLISH-26
PAC MIRAGE Saudi_IBIM_EN_CS6_DB68-04872A-05.indd 26 2016-08-08 오전 11:38:26