Using the Turbo function
You can set the Turbo function to provide fast and powerful cooling (heating).
When the air conditioner is operating in Cool or Heat mode;
AF55JVMAN / AF55JSMAN
Remote controller display
ACKNPPCC
Remote controller display
1. Press the Turbo button.
- (Turbo) will be displayed and the function will operate for 30 minutes.
Cancel
Press the Turbo Button.
• Turbo function is only available in Auto/Cool/Heat mode* and the air
conditioner will return to its previous operation mode after operating for
30minutes in this function. (*Heat mode is applicable for AF55JSMA.)
• Air fl ow direction can be adjusted.
• Temperature and fan speed cannot be adjusted.
• If you select the Turbo function while Long/Single user function is on,
corresponding function will be cancelled.
• You can also turn on/off the Turbo function with the Options button.
1) Press the Options button.
2) Press the <, > or Options button until (Turbo) indicator starts to blink.
3) Press the SET button to set the Turbo function.
NOTE
ENGLISH-25
04 OPTIONS
PAC MIRAGE Saudi_IBIM_EN_CS6_DB68-04872A-05.indd 25 2016-08-08 오전 11:38:25