PROBLEM SOLUTION
Timer function is
not working.
• Check if you have finalized the setting by
pressing the Set button. If you haven't, you need
to set the timer again and press the Set button.
Odors permeate in
the room during
operation.
• Odor may permeate depending on the
surrounding environment or operating
condition. Ventilate the indoor air or operate
Fan mode for 1~2 hours if the odor does not
go away. (Parts of the air conditioner does not
generate any odor)
• Clean the air filter if it is dirty.
Error is indicated.
• If you see , , on the indoor unit
display, check the connection of the power and
communication cable between the indoor and
outdoor unit and restart the power. If you keep
seeing the error, please contact the service
center.
• If you see
, , , , , ,
, , , , , ,
, , , , , ,
, , , , , ,
, , , , , ,
,
blink on the indoor unit display, it means there is
a problem so you should contact a service center.
Troubleshooting
ENGLISH-35
05 OTHERS
PAC MIRAGE Saudi_IBIM_EN_CS6_DB68-04872A-05.indd 35 2016-08-08 오전 11:38:30
To Next Page
Loading...
