Samsung AF55JV MA N Series - Page 53

Installing the air conditioner
How to connect your extended power cables
1. Prepare the following tools.
Tools Crimping pliers Connection sleeve (mm) Insulation tape Contraction tube (mm)
Spec MH-14 20xØ6.5(HxOD) Width 19mm 70xØ8.0 (LxOD)
Shape
2. As shown in the figure, peel off the shields from the rubber and wire of the
power cable.
- Peel off 20 mm of cable shields from the pre-installed tube.
• For information about the power cable specifications for
indoor and outdoor units, refer to the installation manual.
• After peeling off cable wires from the pre-installed tube, insert
a contraction tube.
CAUTION
(Unit: mm)
120
60
202020
180
Power cable
20
Pre-installed tube for the power cable
3. Insert both sides of core wire of the power cable into the connection sleeve.

Method 1
Push the core wire in to the sleeve from both sides.
Connection sleeve

Method 2
Twist the wire cores together and push it in to the sleeve.
Connection sleeve
06 INSTALLATION
ENGLISH-53
PAC MIRAGE Saudi_IBIM_EN_CS6_DB68-04872A-05.indd 53 2016-08-08 오전 11:38:37