Testing operations
7. DIP switch option
1 2 3 4
1 2 3 4
SW507
SW508
DIP switch(SW507) option
On (default) O
Switch 1 Auto address Manual address
Switch 2 Disable snow prevention control Enable snow prevention control
Switch 3
Silence Mode option
Switch 4
When snow prevention mode is in use, eco mode(standby mode)will not be functional.
When DPM installation is applied, the time for auto addressing will take 1~2minutes.
During the addressing,
and will be repeatedly displayed in order for 2 indoor unit connection, , and
for 3 indoor unit connection, , , and for 4 indoor unit connection.
When addressing is completed,
, , , and will be repeatedly displayed in order for 2 indoor unit
connection, , , , , and for 3 indoor unit connection, , , , , ,
and for 4 indoor unit connection.
DIP switch(SW508) option
On(default) O
Switch 1 Auto Silence Mode Manual Silence Mode
Switch 2 - -
Switch 3 - -
Switch 4 - -
8. Silence Mode DIP switch option
DIP switch(SW507) option
Switch 3 Switch 4 Operation
On On Disable Silence mode
On Off Silence mode 1st step
Off On Silence mode 2nd step
Off Off Silence mode 3rd step
ENGLISH-64
PAC MIRAGE Saudi_IBIM_EN_CS6_DB68-04872A-05.indd 64 2016-08-08 오전 11:38:43