Samsung AM036TXMDCH - MCU Branch Part Setup Error - Repeated Setup for the same Address over 3 Times

ƟθͱЇɵʪϑ˵ͱͱϩ˝
Samsung Electronics 29
ߤࣗߤࣗߦđAƸɵθɇʀ˵ΧɇθϩϑʪϩЇΧʪθθͱθࣔŵʪΧʪɇϩʪʒϑʪϩЇΧ˙ͱθϩ˵ʪϑɇʪɇʒʒθʪϑϑͱЭʪθߤϩʪϑ
ߢࢋ ²ͱиϩͱʀ˵ʪʀ
Find an MCU that is composed as the following picture to carry out assembly of branch part again. After completing the
re-setting, press K3 button on the button to reset or turn it off to restart.
Outdoor Unit PCB
Quantity of
Indoor Unit
Quantity of
MCU
Indoor Unit: 3 MCU: 1
Branch
Outdoor unit
display
Indoorunit
display
Duct, Cassette (1/2 Way),Console, Celing Cassette (4/Mini4 Way) Wall-mounted (NeoForte)
Operation Defrost Timer Fan Filter/MPI Operation Defrost Timer Filter Operation Timer Turbo ߣߥঐ ߣߨঐ
㼼 㼼㾠㾠 㼼 㼼 㾠 㾠㼼 㼼 㼼㾠㾠㼼
࢘㽙 : ON 㾠 : Flash ×: OFF
Criteria • The same indoor unit address was setup more than 3 times in MCU
Cause of
problem
• MCU indoor unit address setting error