Product Specifications
4 Samsung Electronics
20 30 40
0
2
4
8
10
12
0.00
0.08
0.04
0.12
0.24
0.16
Amount of transferred heat (kW/m)
Refrigerant ow (Kg/h)
Increased by 30.8%
Decreased by 14%
Pressure loss (kPa/m)
Ø7 Groove Ø8 High Groove
New Ø7 wide n
Ø7 wide n
Heat transfer
amount
15%
New Ø8 wide n
Ø8 Fin
Heat transfer
amount
15%
Feature (cont.)
ĮΧϩіʪʒʀͱͱ˝ࢥ˵ʪɇϩ˝ɇʒʀθʪɇϑʪʒϑцϑϩʪʪ˙˙ʀʪʀцøαЇʒkkǤƟЇθɵͱÃϩʪθࣗʀͱͱʪθ
࡙øαЇʒkkǤ˙ͱθʀθʪɇϑʪʒʪ˙˙ʀʪʀцͱ˙ϩ˵ʪϑцϑϩʪ
• Through Liquid EEV, controlling of valve opening has become more efficient and it achieved optimized system efficssiency and
minimized noise from the refrigerant in the indoor unit.
࡙ƟЇθɵͱÃϩʪθࣗʀͱͱʪθ
• High performing shell & tube type heat exchanger has been applied to secure cooling/heating efficiency. It has secured enough
subcooling to acquire reliability on long piping and it also increased cooling/heating efficiency.
ΧΧʀɇϩͱͱ˙иʒʪ˙
High efficient heat exchanger has been applied, therefore it delays the onset of frost formation and increased heat transfer
efficiency.
Sub-cooled
liquid refrigerant
Low temperature
gas refrigerant
Low temperature
liquid refrigerant
Saturated liquid refrigerant
Cross section of the
Turbo inter-cooler
Cross section of the
conventional inter-cooler
*Increased heat transfer area with Shell & Tube type
온도
Temperature
Turbo Inter-cooler