Piping Diagram
Samsung Electronics 255
Power mode: In cooling mode, the initial target low pressure is lowered to increase the compressor frequency increase
speed.
Performance
Power mode enabled
Target low pressure (8kgf/cm2,g by default)
Target low pressure
(6.5kgf/cm2,g if power mode is enabled)
Default
Pressure
Input unit Seg1 Seg2 Seg3 Seg4Energy control Operation
Main 1 0
0 0 Disabled (default)
0 1 Energy saving
0 2 Power
ƒ Notes
- Operating in energy saving mode, capacity might decrease compared to normal operation mode.
7-3 Functions (cont.)
7-3-3-1 Field Setting (cont.)
7-3-3 Others (cont.)
To Next Page
Loading...
