Disassembly and Reassembly
Samsung Electronics 19
No. Parts Procedure Remark
11 Control Box 1)
Pull out all the connector on the pcb board
Quantity of the connector is different
with different model
2)
Remove the screw which is fixed comp
power wire.
(using "+" screw driver)
3)
Remove the screw which is fixed comp
power wire.
(using "+" screw driver)
The follow step can be divided into 2 case
4)
Case 1:Take off the control box directly
without welding,
a) Remove 2 screws that fix ing reactorwire.
(using "+" screw driver)
b) Pull out the connector as right pic.
To Next Page
Loading...
