Disassembly and Reassembly
20 Samsung Electronics
No. Parts Procedure Remark
11 Control Box
c) Pull out the connector of the wire
that supply single-phase power to
inverter pcb. (Reffer right pic)
d) Pull out the connector of the wire
that supply three-phase power to
power pcb. (Reffer right pic)
e) Remove 2 screws that fixing IGBT
with heatsink,and 2 screws that fix-
ing pcb case.
f) Band the handel of the case and
take off the assy inverter pcb.
(Reffer right pic)
Becareful when take off inverter
pcb;when reassemble should
ensure the silicon grease thin and
even
To Next Page
Loading...
