3-4 Setting Option Setup Method
Samsung Electronics3-4
ex) Option No. :
Step 1 : Enter the Option Setup mode.
1
st
Take out the batteries of remote control.
2
nd
Press the temperature button simultaneously and
insert the battery again.
3
rd
Make sure the remocon display shown as .
Step 2 : Enter the Option Setup mode and select your option according to the following procedure.
Feature Display
Setting Option SEG1.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
. . . repeatedly.
Setting Option SEG2.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
. . . repeatedly.
Change it into the set display of Option SEG3 and SEG4
with the button.
Setting Option SEG3.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
. . . repeatedly.
Setting Option SEG4.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
. . . repeatedly.
1
2
3
4
5
To Next Page
Loading...
