To Next PageTo Next PageWhy does the compressor stop intermittently in COOL or DRY mode and the fan speed decrease on my Samsung AS18A6RC Air Conditioner?
The compressor may intermittently stop or the fan speed of the indoor unit may decrease in COOL or DRY mode to prevent inside/outside air from freezing, depending on the inside/outside air temperature.
What to do if the STD operation LED blinks on my Samsung AS18A6RC?
When a power plug of the indoor unit is plugged in for the first time, the STD operation indication LED blinks to indicate that power is on. The LED stops blinking if you push the operation ON/OFF button on the remote control unit.
Why can't I set the fan speed in AUTO or DRY mode on my Samsung Air Conditioner?
In AUTO mode, the fan speed is automatically selected in 5 steps. In DRY mode, the speed of the indoor fan is set to LL.
What to do if the indoor and outdoor units of my Samsung AS18A6RC Air Conditioner are not operating properly?
Make sure the indoor and outdoor units are properly linked using the same number of cables. Check the terminals to ensure they are correctly connected.
General| Brand | Samsung |
|---|---|
| Model | AS18A6RC |
| Category | Air Conditioner |
| Language | English |
Step-by-step guide for refilling refrigerant in the air conditioner.
Procedure for safely recovering refrigerant before servicing or relocating the unit.
Instructions for taking apart the indoor unit components.
Instructions for taking apart the outdoor unit components.
Initial checks and common issues before diagnosing faults.
Systematic troubleshooting based on observed symptoms and error indicators.
Visual breakdown and part numbers for the indoor unit.
Visual breakdown and part numbers for the outdoor unit.
Detailed circuit diagram for the main Printed Circuit Board.
Electrical connections diagram for the indoor unit.
Electrical connections diagram for the outdoor unit.
Detailed circuit schematic for the indoor unit.
