Disassembly and Reassembly
4-12Samsung Electronics
No Parts Procedure Remark
2 Electronic Part
– Indoor&Outdoor
Connecting
Cable)
1) Unscrew 2 fixing screws of the Case
Control and screw of Thermistor Wire
and holder.
2) Push the hook, and pull the knob of a
Case.
3) Detach the indoor and outdoor connection
wire cable connected to the Terminal.
4) Detach the Fan Motor connection wire,
Heat Exchanger Sensor connection wire,
and the Drain Pump Float S/W
connection wire from the connecter.
5) Detach the Control Box from the Main
Body.
24103A(1)_1 12/23/05 12:01 PM Page 3-21
To Next Page