Disassembly and Reassembly
4-14Samsung Electronics
No Parts Procedure Remark
4 Fan
&
Motor
6) Detach the Drain Pump Sensor from
the holder, and detach the Heat
Exchanger from the main body by
pushing it to the direction of Drain.
3) Unscrew 4 screws of Cover Motor and
Evap Guide connected to the Case Motor.
2) After detaching the Cover Motor by
pushing the hook, detach the Cover Evap
Guide.
5) Detach the Motor and Fan from the Case.
(Use M3 wrench when detaching the
Motor from the Fan.)
24103A(1)_1 12/23/05 12:01 PM Page 3-23
To Next Page