What to do if my Samsung AX40T3030WM filter replacement indicator not turning off?
After replacing the 2-in-1 filter on your Samsung Air Cleaner, press the [ ] for over 3 seconds to reset the filter replacement alert.
What to do if my Samsung Air Cleaner is not working?
If your Samsung Air Cleaner isn't working, first ensure the power is on and try turning the air purifier on again. Check that the power plug is properly connected, and if it still doesn't work, try connecting the plug to other power outlets.
Why is the Comprehensive Air-quality indicator always red on my Samsung Air Cleaner?
If the Comprehensive Air-quality indicator on your Samsung Air Cleaner is always red, check the sensors for any foreign substances and clean them if necessary. In winter, dew may form on the sensor due to temperature differences; ventilate the room for 1 to 2 hours. You can also try disconnecting the power plug and reconnecting it after a minute to reset the sensors.
Why does my Samsung AX40T3030WM only blow air from the rear?
General| Model | AX40T3030WM |
|---|---|
| Type | Air Cleaner |
| Color | White |
| Filter Type | HEPA Filter |
| Noise Level | 50 dBA |
To Next Page