Connecting to a Power Source
[] Insert the battery as shown
- If the camera does not turn on
after you have inserted battery,
please check whether the
battery (+ / -).
- When the battery chamber
cover is opened, do not force
the battery chamber cover,
this may damage it.
inserting the rnernory card
[] insert the memory card as shown.
- Turn off the camera's power be-
fore inserting the memory card.
- Have the front of the memory
card facing toward the front of
the camera (lens) and the card
pins toward the back of the
camera (LCD monitor).
- Do not insert the memory card
the wrong way round.
Doing so may damage the
memory card slot.
[] There are 4 indicators for battery condition that are displayed on
the LCD monitor.
,rrT1 _ gel I
Lowbattery Lowbattery
Batteryempty.
capacity capacity (Recharge
The battery is (Prepareto (Prepareto
oruse spare
fully charged rechargeor use rechargeor use battery)
sparebattery) sparebattery)
._ When using the camera and the battery in a place that is excessively cold or hot,
the battery status on the LCD may be different from the actual battery status.
13
To Next Page
Loading...
