Self-timer ( _ ) / Right button
[] Motion Timer
Pressing the Shuter button after Blink (1 second interval)
setting the Motion Timer
Detecting the subject's movement Blink (0.25 second interval)
Turn on and the image is taken
No movement is detected
after 2 seconds
MENU / OK button
[] MENU button
- When you press the MENU button, a menu related to each
camera mode will be displayed on the LCD monitor. Pressing it
again will return the LCD to the initial display.
- A menu option can be displayed when the following are selected :
MOVIE CLIP and STILL IMAGE mode. There is no menu
available when the voice recording function is selected.
[] The Motion Timer flows are as followings. (Movie Clip mode excluded)
Selecting the Motion Timer -+ Pressing the Shutter button -e
Confirming the composition (Within 6 sec.) *_-e Starting the
detection (Swing your hands fully) 2--). Stopping the detection
(Do not move) -+ Taking an image (after 2 sec.)
•1:Thecameradetectsthesubject'smovement6secondsafterpressingthe
Shtterbutton,so confirmthecompositionwithin6 seconds.
•2:Moveyourbodyor handsfully.
]in the following cases, the MotionTimer may not operate.
® Thefocus distance isover 3m.
Thedetectionrangeof
® The exposure is too bright or dark MotionTimer
® in backlight conditions.
® The movementis insignificant
® The movementisdetected beyond
the center part(50%) of the sensor
wherethe movement is recognized.
® If the cameradoesn't sense any
movementfor 30 seconds, orthe
cameradoesn't sense stillness
aftersensing movement
32
]PressingtheMENUbutton]
]Menu off] ]Menu on]
[] OK button
- When the menu is displayed on the LCD monitor, this button is
used for shifting the cursor to the sub menu or for confirming data.
To Next Page
Loading...
