Plabackvb k Qj
Copy ToCard
This enables you to copy image files, movie clips and voice recording
files to the memory card.
1. Select the [Copy To Card] menu tab by
pressing the Up / Down button. And then
press the Right button.
2. Select a desired sub menu by pressing
the UP/DOWN button and press the OK
button.
- [No] : Cancels "Copy to Card".
- [Yes] :All images, movie clips and voice
recording files saved in the internal memory are copied
to the memory card after the [Processing!] message is
displayed. After copying has been completed, the screen
will return to play mode.
o hen this menu is selected without inserting a memory card,
the [No Card] message will be displayed.
• If there is not enough space available in the memory card to
copy saved images in the internal memory (About 16MB), the
[Copy To Card] command will copy only some of the images
and display [Memory Full!] message. Then the system will
return to the playback mode. Please be sure to delete any
unnecessary files to free up space before inserting the memory
card into the camera.
• When you move the images that are stored in the internal
memory by doing [Copy To Card] to the card, the next number
offile names will be created in the card to avoid duplication of
the file name.
- When the [Reset] of the [File] setup menu is set : The copied
file names start from after the last stored file name.
- When the [Series] of the [File]setup menuis set : The copied
file names start from afterthe last captured file name. After
completing [Copy ToCard],the laststored imageof the last
copied folder is displayedon the LCD monitor.
69
To Next Page
Loading...
