Flash ( _ ) / Left button
When the menu is displayed on the LCD
monitor, pressing the LEFT button makes
the cursor shift to the left tab.
When the menu is not displayed on the
LCD monitor, the LEFT button operates as
the FLASH ( _ ) button.
[Selecting the Auto flash]
[] Selecting the flash mode
1. Press the Mode button to select a RECORDING mode with the
exception of the Movie clip mode or the DIS mode.(p. 18)
2. Press the Flash button until the desired flash mode indicator is
displayed on the LCD monitor.
3. A flash mode indicator wilt be displayed on the LCD monitor.
Use the correct flash to suit the environment.
[] Flash range (Unit: m)
::to::
o18_;io10.8_215o.4_o181o15_0180.4-3.o0.5_2.5
o
o
o
If you press the shutter button after selecting the flash, the first
flash fires to check the shooting condition (Flash range and
Power ratio of flash).
Do not move the camera until the second flash fires.
Using the flash frequently will reduce the life of the battery.
Under normal operating conditions the re-charging time for
the flash is usually within 4 seconds. If the battery is weak, the
charging time will be longer.
In the DiS mode, [Landscape], [Close up], [Text], [Sunset],
[Dawn], [Firework] scene modes and the Movie clip mode, the
flash function will not operate.
Take photographs within the flash range.
The image quality is not guaranteed if the subject is too close
or highly reflective.
When taking an image in poorly lit conditions with the flash,
there may be a white speck in the captured image. The speck
is caused by the flash light reflecting off atmospheric dust.
29
To Next Page
Loading...
