EasyManua.ls Logo

Samsung BL103 - Page 74

Samsung BL103
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
important notes
Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid
environment, condensation can form on the delicate electronic
circuitry. If this occurs, turn the camera off and wait for at least
1 hour until all moisture is dispersed. Moisture built up can also
occur on the memory card. If this happens, turn off the
camera and remove the memory card. Wait until the moisture
has dispersed.
Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in the
discoloration and deterioration of the image sensor.
- Take care not to get fingerprints or foreign substances on the
surface of the tens.
If the digital camera is not used for a long period, an electric
discharge can occur. It is a good idea to remove the battery and
the memory card if you do not intend using the camera for an
extended period of time.
If the camera is exposed to an electronic interference, it wilt turn
itself off to protect the memory card.
Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the
lens and LCD assemblies, tf this does not work, lens-cleaning
paper with tens cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this
camera to come into contact with solvent materials such as
benzol, insecticide, thinners etc. This may damage the body
shell of the camera and also affect its performance. Rough
handling can damage the LCD monitor. Take care to avoid
damage and keep the camera in its protective carry case at all
times when not in use.
Do not attempt to disassemble or modify the camera.
Under certain conditions, static electricity can cause the flash unit
to fire. This is not harmful to the camera and is not a malfunction.
When images are uptoaded or downloaded, the data transfer may
be affected by static electricity. In this case, disconnect and re-
connect the USB cable before trying the transfer again.
Before an important event or going on a trip, you should check
the camera condition.
-Takea picture for testing the camera condition andprepare extra battery.
- Samsung cannot be held responsible for camera malfunctions.
73

Table of Contents

Other manuals for Samsung BL103

Related product manuals