Samsung CLP-600 Series - Test Print

Alignment and Adjustmens
Samsung Electronics
Service Manual
6-27
6.6.2.5 Test Print
This function allows you to test the overall function of the print engine. You can select either a 4 * 4 color bar pattern or a
solid color pattern. If the solid pattern is selected 4 pages are printed - one for each color. You can also print the EDC
Mode Menu Map.
<How to operate>
- Explore the menu until "Test Print" message is displayed on LCD.
- Press "Enter" key to select sub items.
- In the "Select Tray" menu, select paper tray from which paper is fed.
- In the "Select Pattern" menu, choose test pattern.
- If "Print Pattern" is selected, printing starts.
For safety - after printing a test pattern if you need to return to EDC mode turn the printer off and then re-enter EDC
Mode by turning power on whilst holding in the "Enter" key.