Samsung CLP-600 Series - Printer Settings Configuration

Samsung Electronics
Service Manual
Disassembly and Reassembly
5-40
>> Before disassembling it :
* Remove the Fuser (Refer to 5.4.6)
* Remove the Top Cover Ass'y (Refer to 5.4.7)
* Pull the SMPS (Refer to 5.4.14)
1. Remove the two screws securing the Holder AC Unit and then remove the Holder AC Unit in the direction of arrow.
2. Unplug the Holder AC Unit connector from the SMPS, as shown below.
5.4.15 Holder AC Unit
Screw
Screw
Holder AC Unit
Holder AC
Harness
SMPS
Connector(Holder AC Unit)