Samsung CLX-3185FW - ADF Assy (Only 4 in 1 Model)

Disassembly and Reassembly
Service Manual
3-9
Samsung Electronics
3.4.2 ADF Assy (Only 4 in 1 model)
1. Remove the harness cover and then unplug the
connector.
2. Lift the ADF Assy up.
3. Open the ADF cover. Remove the ADF pad unit.
4. If the ADF roller is defective, remove the ADF
open unit.
5. Release the stacker by pushing it to the direction
of arrow.
ADF pad
ADF pad
ADF pad