Alignment & Adjustment
3-2 Samsung Electronics
3-2 How to Access Service Mode
MENU Show all menus
▲ / ▼
Move the cursor to select an item.
◀ / ▶
Adjust the selected configuration value
1. To enter Service Mode, press the keys on the remote control according to the following sequence. (in Stand-by status)
Info → Menu → Mute → Power On
※ When failing to enter Service Mode, repeat the procedure above.
2. The initial screen of Service Mode.
3. Functions of the Keys within Service Mode
Service / T_SHPEU_XXXX
Option (XX XX XX)
Deflection
Video Adjust 1
Video Adjust 2
Video Adjust 3
Video Adjust 4
Video Adjust 5
YC Delay
EEPROM
Checksum(XXXX)
Reset / XX-XX-XX
Service / T_SHPAS_XXXX
Deflection
480/576P Deflect Offset
1080i Deflect Offset
4:3 Offset -- Vixlim
Video Adjust 1
Video Adjust 2
Video Adjust 3
Video Adjust 4
Video Adjust 5
Video Adjust 6
DTV Video Adjust
DTV Video Adjust2
YC Delay
EEPROM
Option (XX XX XX)
Checksum(XXXX)
Reset / XX-XX-XX
To Next Page
Loading...
