■ This controls the path of the electron beams from the CRT electron guns using the deflection coil.
9-2-2 Names & Roles of Key Parts
* CN03 : This is a 14 pin port connected to the CRT Assy's, and outputs final R/G/B signals to the CRT Ass'y.
In addition, it outputs the Tilt, VM, and Power signals for the CRT Drive.
* CN07 : This is a 6 pin port connected to the Master Ass'y, and receives Master Power On/Off, and IR signals.
* CN06 : This is a 4 pin port connected to the Control Ass'y, and receives TV/Video, Menu, Ch Up/Down and Vol -/+ signals.
* CN701 : This is a 10 pin port connected to the Side AV, and receives S-Video2 and AV4 external inputs.
To Next Page
Loading...
