1
3
4
3
2
When you turn the hex wrench counter-clockwise( ), the door will move up.
4. After adjusting the doors, please insert the supplied fastener-ring (
5
) using a pair of pliers (
6
) in
the gap between the hinge-grommet (
7
) and the lower hinge(
8
). The number of fastener-rings
you’ll need to insert depends on the gap.
Two fastener-rings are enclosed with the refrigerator.
The thickness of each fastener-ring is 1mm(0.04 inch).
ADJUSTING THE FREEZER DRAWER LEVEL
Adjustment part
Freezer Drawer
1. Locate the height-adjuster (
1
) in the freezer drawer.
Unscrew the four Phillips screws (
2
) slightly to loosen the door.
2. Loosen the controller screw(
3
) with a Phillips screwdriver.
1
2
3
14_Setting Up
Setting up your French Door
Refrigerator
To Next Page
Loading...
Need help?
General
