Filter Indicator
When the filter indicator light is on, it is time to change the filter. Typically this happens about
every 6 months.
The Filter Indicator will be Blue when you initially insert the water filter.
The Filter Indicator will be Light Pink when you have used your water filter for 5 months.
The Filter Indicator will be Red when you have used your water filter for 6 months.
After removing the old water filter and installing a new one (see page 30 for instructions on how
to do this), reset the indicator by pressing and holding the “Ice/Water” button for 3 seconds. The
indicator will light again in about 6 months to let you know it is time to change your water filter.
Energy Saver
This icon will light up when you activate the “Energy Saver” feature. Energy Saver function is set
“ON” when you supply the power to the Refrigerator installing. If condensation occurs on the
doors, turn the Energy Saver function off.
Lighting
This icon will light up when you activate the “Lighting” feature. In this case, the dispenser
light(under the display) will be on constantly. If you would like the dispenser light to come on only
when using the dispenser, turn the “Lighting” feature off.
Alarm
This icon will light up when you activate the “Alarm” feature. The door alarm will sound if any
door is open for more than 3 minutes. The beeping stops when you close the door. Initially the
Alarm is set to on.
Ice Off
This icon will light up when you activate the “Ice Off” feature. In this case, the ice will not be
produced.
Lock
This icon will light up when you activate the “Lock” feature. In this case, you won’t to be able to
use the control panel. If you press and hold the Ice Off / Lock button for 3 seconds, you will be
able to use the control panel again.
22_Operating
Operating the SAMSUNG
French Door Refrigerator
To Next Page
Loading...
Need help?
General
