Setting Up _9
01 SETTING UP
HOW TO ASSEMBLE THE HANDLE
Fridge door handle assembly
OKOK
By using L-wrench, Fix the screw with the Longer part of it and
then fully tighten up with the Shorter part.
To best conceal the connection
points : Assemble the handles
with the mounting screws facing
each other.
the screw and then put the handle
(Optional)
HOW TO ASSEMBLE THE HANDLES (CONT’D)
OKOK
*
Tilt up the Handle bar and turn the wrench.
By using L-wrench, Fix the screw with the Longer part of it and
then fully tighten up with the Shorter part.
To best conceal the connection
points : Assemble the handles
with the mounting screws facing
down.
Freezer / Flex zone door handle assembly
Please do not remove the Freezer / Flex Zone drawer. Handle can be attached without
removing the door.
CAUTION
REMOVING THE REFRIGERATOR DOORS
If the Refrigerator is too large to pass through your doorway easily, you can remove the refrigerator
doors.
REMOVING THE REFRIGERATOR DOORS
Philips head Wrench(10mm) Flat head screwdriver Pliers Allen wrench(5mm)
screwdriver
To Next Page
Loading...
Need help?
General
