Samsung
DCS-408 & 408i Keyphone System Installation Manual
ā 16 ā
The cables required for each jack differ according to the type of jacks as follows.
y BRI1 / BRI2 ports: RJ-45 cable (8-pin, DCS-408i only)
y CO1.2 / CO3.4 ports: RJ-11 cable (6-pin, DCS-408 only)
y MISC port: RJ-11 cable (6-pin)
y DLI / SLI ports: RJ-11 cable (4-pin)
NOTE: These cables are not supplied with your system and should be prepared separately.
Tieing the Cables
You should tie all the cables using the cable ties supplied with your system after completing
the cabling to the modular jacks.
To Next Page
Loading...
