Samsung DCS-408i - System Mounting and Grounding; Fixing the System on the Wall

Samsung
DCS-408 & 408i Keyphone System Installation Manual
– 11 –
O solder the ends of the two cables together, or
O expose sufficient wire on both cables to twist them together tightly (Fig. 4.)
Figure 4
NOTE: The cable for external grounding is not supplied with your system and should be
prepared separately.
The system can now be installed as a freestanding unit or may be secured to a wall using the
following procedure.
 Fixing the System on the Wall (Optional)
The unit has three grooves on the rear for fixing to a wall using the screws and rawl plugs
provided.
Green cable
Twist wires tightly
Externally grounded cable