Samsung DE40A - Receiver

160
System
8
8 System
8.12.3 Receiver
Sound is played through the receiver.
The connected device is not
displayed.
 Check whether or not the device supports Anynet+ functions.
 Check whether or not the HDMI cable is properly connected.
 Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
 Search Anynet+ devices again.
 Anynet+ requires an HDMI connection. Make sure the device is
connected to your product with an HDMI cable.
 Some HDMI cables may not support Anynet+ functions.
 If the connection is terminated because there has been a power
failure or the HDMI cable has been disconnected, please repeat
the device scan.
The product sound is not
output through the receiver.
 Connect the optical cable between product and the receiver.
Problem Possible Solution