Disassembly and Reassembly
19Samsung Electronics
No Parts Procedure Remark
1 Control In/
Drain Pan
(to clean)
1) Disassemble 1 screw of indicating part
then lift up the cover to release
from Ass'y Control In.
2) Detach the capacitor connection wire,
the Motor-Fan in and housing connector
from Ass'y Control In.
3) Disassemble 2 screws of indicating
parts then lift up Ass'y Control In.
4) Disassemble 6 screws around indicating
part then pull it.
5) You can check inside of the product if
Drain part is something wrong.
■ LH105EZM1 / LH128EZM1 / LH140EZM1 / HH105EZM1 / HH128EZM1 / HH140EZM1
22143A(4)_1 2/13/06 3:03 PM Page 19
To Next Page
Loading...
