Disassembly and Reassembly
Samsung Electronics20
No Parts Procedure Remark
2 Motor In
&
Blower
&
Evap
1) Disassemble 1 screw of indicating
part then lift up the cover to release from
Ass'y Control In.
2) Detach the capacitor connection wire,
the Motor-Fan in and housing connector
from Ass'y Control In.
3) Disassemble all screws of bottom part.
Disassemble 2 screws which are
located Drain Hole part.
Bottom Side
22143A(4)_1 2/13/06 3:03 PM Page 20
To Next Page
Loading...
