Samsung DIGIMAX 240 - Lcd Brightness

57
ADVANCED
Recording mode
LCD BRIGHTNESS
Selecting the LCD brightness
1. Turn the camera power on.
2. Select the MOVIE CLIP/STILL IMAGE mode by rotating the
mode dial.
3. Do not turn the LCD monitor off.
4. Press the MENU button in the STILL IMAGE mode to display
[STILL IMAGE 1/2] menu on the LCD monitor.
5. Select [STILL IMAGE 2/2] menu by pressing the RIGHT( )
button.
6. Press the UP( )/ DOWN( ) button and select [LCD
BRIGHTNESS].
7. Press the RIGHT( ) button and the sub menu will display.
8. Press the UP( )/ DOWN( ) button and select the desired
sub menu.
9. Press the OK button to confirm the setting.
The default is [0].
10. Press the MENU button to cancel the menu display.
In STILL IMAGE/MOVIE CLIP mode, you can select the LCD brightness.
You may adjust the LCD brightness. Brightness range : -5 ~ 0 ~ +5
STILL IMAGE mode
STILL IMAGE mode
STILL IMAGE 2/2
QUICK VIEW ON
LCD BRIGHTNESS 0
EXIT:MENU CHANGE:
STILL IMAGE 2/2
LCD BRIGHTNESS
0
BACK: SET:OK