Samsung DIGIMAX 240 - Video out

83
ADVANCED
Setup mode
VIDEO OUT
Selecting the video out type
1. Turn the camera power on.
2. Select the SETUP mode( ) by rotating the mode dial.
3. [SETUP 1/3] menu will display.
4. Select [SETUP 2/3] menu by pressing the RIGHT( ) button.
5. Press the UP( )/ DOWN( ) button and select [VIDEO OUT].
6. Press the RIGHT( ) button and the sub menu will display.
7. Select [NTSC] or [PAL] by pressing the UP( )/ DOWN( )
button.
8. Press the OK button to confirm the setting.
INFORMATION
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,
Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway.
The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be
governed by the type of machine (monitor or TV, etc.) to which the camera is connected.
Select the correct movie standard for the outer monitor. PAL mode can support only BDGHI.
SETUP 2/3
DATE IMPRINT ON
DATE TYPE Y/M/D
DATE SETUP
VIDEO OUT NTSC
CHANGE:
SETUP 2/3
VIDEO OUT
NTSC
PAL
BACK:
SET:OK