72
Play mode
LCD BRIGHTNESS
You may adjust the LCD brightness.
Brightness range : -5 ~ 0 ~ +5
Selecting the LCD brightness
1. Turn the camera power on.
2. Select the PLAY mode( ) by rotating the mode dial.
3. Do not turn the LCD monitor off.
4. Press the MENU button to display the PLAY mode menu
on the LCD monitor.
5. Press the UP( ) /DOWN( ) and select
[LCD BRIGHTNESS].
6. Press the RIGHT( ) button and the sub menu will display.
7. Select the desired LCD brightness by pressing the UP( )
/DOWN( ) button.
8. Press the OK button to confirm the setting.
9. Press the MENU button to cancel the menu display.
NOTICE
Remember that this will permanently delete unprotected images. Important shots should be
stored on a computer before deletion takes place.
PLAY 1/2
SLIDE SHOW 3 SEC
PROTECT
DELETE ALL
LCD BRIGHTNESS 0
EXIT:MENU CHANGE:
PLAY 1/2
LCD BRIGHTNESS
0
BACK: SET:OK
To Next Page
Loading...
