79
ADVANCED
Setup mode
RESET
This menu allows you to reset the camera settings to the default.
Selecting the default camera setting
1. Turn the camera power on.
2. Select the SETUP mode( ) by rotating the mode dial.
3. [SETUP 1/3] menu will display.
4. Press the UP( )/ DOWN( ) button and select [RESET].
5. Press the RIGHT( ) button and the sub menu will display.
6. Select [YES] or [NO] by pressing the UP( )/ DOWN( )
button and press the OK button.
[Selecting YES] : All the camera settings are changed to the
camera default setting.
[Selecting NO] : SETUP menu will display without resetting
the camera system.
Camera setting Default Camera setting Default
Image size 1600 X 1200 White balance Auto
Quality Fine EV compensation 0.0
Flash Auto flash Slide show 3 sec
LCD brightness 0 Power off 3 min
Quick View ON Beep ON
SETUP 1/3
BEEP ON
FORMAT
POWER OFF 3 MIN
RESET
CHANGE:
SETUP 1/3
RESET
NO
YES
BACK:
SET:OK
The default camera setting
To Next Page
Loading...
