Samsung Digimax 340 - Removing the Usb Driver for Windows

REMOVING THE USB DRIVER FOR WINDOWS
Reference
If you are a Windows 2000/ME/XP user, follow the procedure below to remove the USB
Driver.
1. Connect the PC to the camera (PC mode, power on)
2. As mentioned above, remove [Samsung Digimax 410]
in [Add/Remove programs]
3. Click [Unplug or Eject Hardware] icon on the task bar.
Click [Stop] on the [Unplug or Eject Hardware] window
and click [Ok] on the next window.
4. Click [System] on Control Panel.
Trace [Device Manager Universal serial bus
controller Samsung USB Mass Storage Device]
and click the right mouse button. Then the
following window will be displayed.
Click [Remove] to remove the USB Driver.
Restart the computer