SOFTWARE
HOW TO SET UP THE SOFTWARE FOR WINDOWS
How to set up the software
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following frame is automatically run.
1. Driver : This enables images to transfer between the camera and PC.
Driver installation for Windows : refer to page 86
2. Image Viewer : Digimax Viewer. Refer to page 90
3. Application : MGI PhotoSuite SE : image editing program. Refer to page 92.
4. Web Site Link : You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
Reference
If you insert application CD for Digimax 340 in the CD-ROM drive, all the ‘Digimax 410’ text
will be changed to ‘Digimax 340’
Check the system requirements (page 83) before setting up the driver.
You should allow 5~10 seconds for running the automatic setup program according to the
capability of the computer. If the frame does not show, run the [Windows Explorer] and select
[Samsung.exe] in the CD-ROM Drive root directory.
To Next Page
Loading...
