Samsung Digimax 340 - Setting up the USB Driver for MAC; How to Install and Use the USB Driver for MAC

HOW TO INSTALL AND USE THE USB DRIVER FOR MAC
Setting up the USB Driver for MAC
1
The USB Driver for MAC is not included with the Application CD as MAC OS support the
camera driver.
2
Check MAC OS.
This camera is available in MAC OS 9.0~10.1.3.
3
Connect the camera to the Macintosh and turn the camera power on in PC mode.
4
A new icon (Untitled) will be displayed on the desktop after connecting the camera to the
MAC.
Using a USB Driver for MAC
1
Double click a new icon (Untitled) on the desktop and the folder in the CF CARD will be
displayed.
2
Select an image file and copy or move it to MAC.
Note
Before connecting the camera to MAC, check that the CF CARD is inserted in the card slot.