SETTING UP PLAY BACK FUNCTIONS
Setting up play back function by using the camera button
THUMBNAIL / ZOOM W button
You can view up to 6 images at a time by using the THUMBNAIL function.
1. Turn the camera power on.
2. Rotate the mode dial to the PLAY mode.
3. An image displays on the LCD monitor.
4. Press the THUMBNAIL ( ) button.
The thumbnail display will highlight the image that had been showing at the time the
thumbnail mode was selected.
5. Press the
/ / / buttons to move to the desired image. Selected image is
highlighted. Icons are displayed to indicate the type of file selected.
6. When viewing a thumbnail image, press the [ZOOM T] button and the selected shot will
show in single display mode.
- : Movie clip file
- : DPOF indicator
- : Sound recorded file
Press THUMBNAIL button
[ Single display mode ]
Highlighted image
(selected image)
[ Thumbnail display mode ]
The PLAY mode can be set using the camera button.
2002/ 01/ 01 00 : 00
13/13
SELECT OK SET
S410(340)0001.JPG
123
654
To Next Page
Loading...
