SETTING UP THE SHOOTING FUNCTION
EXPOSURE
This camera automatically adjusts the exposure according to the ambient lighting
conditions. However, you can select the exposure value by using [EXPOSURE] sub menu.
This function can be used in STILL IMAGE and MACRO SHOT mode.
If you increase the exposure value, the image will be brighter.
If you decrease the exposure value, the image will be darker.
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or
MACRO SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD
monitor. Press UP (
) / DOWN ( ) button and select
[EXPOSURE].
5. To select [EV], press the RIGHT ( ) button
6. The cursor can be moved by pressing the RIGHT ( )
button to the [EV] sub menu.
< STILL IMAGE mode >
< MACRO SHOT mode >
EXPOSURE
EV
+0.5
0.0
-0.5
P2 SELECT OK SET
EXPOSURE
EV
+0.5
0.0
-0.5
P2 SELECT OK SET
To Next Page
Loading...
