ADVANCED
SETTING UP THE SHOOTING FUNCTION
LCD
You may adjust the LCD brightness.
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or MACRO
SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD monitor.
Press UP (
) / DOWN ( ) button and select [LCD].
5. The cursor can be moved by pressing the RIGHT ( ) button
to the [BRIGHTNESS] sub menu.
6. LCD BRIGHTNESS SELECTION SCREEN as shown
alongside will be displayed by pressing the RIGHT ( )
button.
7. Select the desired brightness value by pressing the UP ( ) /
DOWN ( ) buttons.
The LCD monitor has 9 brightness settings.
8. After selecting the desired brightness value, press the OK
button to confirm the setting.
9. Press the MENU button to cancel the menu display.
LCD
SELECT OK SET
8
2
4
6
0
5
LCD
BRIGHTNESS
P2 SELECT OK SET
To Next Page
Loading...
